Bookmark and Share Email this page Email Print this page Print Feed Feed

Vigor delivers new fireboat to San Francisco

Aug 16, 2016 04:15 PM

The Jensen-designed boat can pump 18,000 gallons per minute

Courtesy Vigor Industrial

The following is the text of a news release from Vigor Industrial:

(SEATTLE) — Vigor recently delivered an 88-by-25-by-14-foot state-of-the-art fireboat to the San Francisco Fire Department. Designed by Jensen Maritime and built at Vigor’s Seattle shipyard, the fireboat is the first fireboat in 61 years to join San Francisco’s fleet.

The vessel is not only an exceptional firefighting tool but also a mobile pumping station powerhouse. It’s capable of pumping millions of gallons of water directly from the bay into the city’s auxiliary water system. This critical feature will keep fire hoses flowing in the event an earthquake damages San Francisco’s water mains. 

“Construction of this fireboat is a source of pride for all concerned,” said Keith Whittemore, Vigor executive vice president of business development. “It’s a complex vessel with multiple modes of operation and different systems that need to communicate with each other seamlessly to give the city’s firefighters the best possible tool for the future. Vigor, Jensen and many great suppliers did a great job pulling together as a team to make that intricate systems integration happen within the delivery schedule.”

Cummins was key to the most important feature of the fireboat, its critical pumping and propulsion power. The vessel features three QSK19-M EPA Tier 3 engines that provide 750 hp at 1,800 rpm pumping power to three Counterfire ESF 300-550 monitors with capacity for 6,000 gpm each — a total of 18,000 gpm of flow with all three engines in pumping mode. Power is transmitted to the pumps via three Logan LC318 SAE 0 air-actuated clutches and Elbe cardan shafts with a Centa Centaflex-R flywheel mounted torsional coupling.
 
In addition to providing pumping power, the two outboard engines also provide 591 hp at 1,800 rpm for propulsion operations from the front of the engine. Propulsion power is transmitted through a Centa CX-56 torsional coupling and a Reintjes WAF 364 reduction gear provided by Karl Senner.

Special attention was paid in noise and vibration reduction by the designers. All three engines are mounted on Christie & Grey TSC T-10 vibration isolators resulting in excellent performance. Joe Tobin, Cummins project and commissioning lead, said, “It truly was a team effort to engineer solutions for this impressive vessel. The suppliers brought the best products and people together.”

The new fireboat, which has not yet been named, will be christened on Oct. 17, which also happens to be the anniversary of the 1989 Loma Prieta earthquake. This infamous quake burst the domestic water lines beneath San Francisco. Should this happen again, Fireboat 3 (as it is currently called) will be there to ensure the auxiliary water system has the water needed to protect the city’s citizens and property.

PREVIOUS REPORT

(SAN FRANCISCO) — Vigor Industrial has delivered a new $11.8 million fireboat to the city of San Francisco, the San Francisco Examiner reported. The 88-foot boat, designed by Jensen Maritime Consultants, is capable of pumping 18,000 gallons per minute. Currently called Fireboat 3, the Cummins-powered vessel will be formally named at its christening in October.

Click here to read the story.

Add your comment:
Edit Module