Salvage crews complete fuel removal from SEACOR Power

Hydraulic fluid in the capsized liftboat will be removed when the vessel is raised

(HOUMA, La.) — Salvage crews have completed the removal of diesel fuel from SEACOR Power’s fuel tanks, the U.S. Coast Guard announced Wednesday.

Crews removed approximately 20,363 gallons of diesel fuel from the liftboat using the hot tapping method, which involves drilling into the fuel tanks, making a hose connection, and transferring the fuel to portable tanks.

Approximately 4,500 gallons of hydraulic fluid remain on SEACOR Power. The tanks have not been compromised, but are currently inaccessible. The hydraulic fluid will be removed after the vessel is raised.

1000w Q95

SEACOR Eagle is staged with gear near SEACOR Power on May 1 off Port Fourchon, La. Eagle is being used as stable platform to assist in salvage and pollution response operations. U.S. Coast Guard photo

The Coast Guard continues to monitor for any oil discharges and SEACOR Marine has an oil spill response organization (OSRO) standing by to respond to any situation in which there is recoverable oil.

Salvage crews will now move to the salvage phase, focusing on removing debris and refloating the vessel.

The timeline for the raising of the vessel depends on many factors including primarily the safety of salvage crews, the weather, and addressing any new structural changes that may occur. The priority is to salvage the vessel in a safe and efficient manner. The raising of the vessel is not expected to occur before June.

There is a Coast Guard safety zone covering a 1-nautical-mile radius around the incident site in effect until June 15.

There is a Federal Aviation Administration temporary flight restriction covering a 5-nm radius around the site, and a 2,000-foot minimum altitude around the site in effect until June 15.

The capsizing of SEACOR Power on April 13 is under investigation by the National Transportation Safety Board and the Coast Guard.

– U.S. Coast Guard

Categories: Maritime News